Today we need to put the spacer under the two claw pieces. We then need to start attaching the syringes to the syringe pipe and watch the video to accurately fill the syringes. We need to figure out exactly where we need to put the syringes on the arm and start attaching them. We also will need to find good quality wire for the two claw pieces.
Reflection:
Today we cut out the spacers, drilled a hole through them and attached the under the two claw pieces.
We filled the syringes with the food dye and water making sure we did it is exactly like the video. We made sure you could see the colour and it popped.
We bent some strong wire into a Z shape to pull the claw. We also drilled holes into the syringe and claw so now the claw is working we just need to attach it.
We also started a document with what we talked about with Wian Van der Worm and his opinion and ideas. It helped us learn more about hydraulics. He also printed some paper for us that had lots of hydraulics information on it. It was quite complicated for us but we got the basics. Next week we need to finish adding all the syringes and finish the presentation.
No comments:
Post a Comment
Please structure your comments as follows:
Positive - Something done well
Thoughtful - A sentence to let us know you actually read/watched or listened to what they had to say
Helpful - Give some ideas for next time or ask a question you want to know more about
Note: only a member of this blog may post a comment.