Attaching all the syringes to the arm

Plan for the Day:

Today we are going to attach the claw syringe to the arm. We also need to attach the upper arm, lower arm, and turning syringe to the arm and if we don’t finish this today we will need to do it at home. We need to make sure that the syringes are secured tightly so that they arm will function smoothly and not move around. We will need to make sure that each individual syringe is functioning perfectly before we move onto the next syringe. We will also need to find what is the best way to attach the syringes to make sure they are sturdy and don’t move.

Reflection:

Today we got a science board
and started planning what we
are going to put on it.



We also started a presentation slideshow and put things like what we have learnt, why we chose this project and impact on the community.


We found out that the metal
we used for the claw was too
strong so we had to use slightly
weaker metal.

We started attaching syringes
to the arm. We glued and attached
the claw syringe on and it works and
we finished the  turning syringe.We have
decided not to do a control panel because
it was one of the reasons the prototype did not work.